Energy Consumption
Intelligence
Understand where every kilowatt and cubic metre goes — then systematically reduce what you do not need.
Omni Vision meters all energy streams — plus any additional process signal or data source on your site — and applies EPSA Energy's AI analytics to custom KPI dashboards that reveal consumption patterns, quantify waste, benchmark performance, and track reduction targets.
Omni Vision
At a Glance
Turnkey metering and AI analytics platform — EnerTherm precision instrumentation and PLC integration combined with EPSA Energy's cloud intelligence and real-time custom KPI dashboards for complete energy management.
Energy Monitoring
Applications
Select an application to see how Omni Vision drives measurable energy reduction.
Omni Vision captures granular consumption data across all energy streams and builds detailed load profiles — revealing baseload waste, peak demand drivers, and time-of-use patterns. You see exactly when and where energy is consumed, establishing the baseline from which every improvement is measured.
Any Data Source
Six energy streams plus any process signal or PLC tag
AI Waste Detection
Continuous anomaly identification, not periodic audits
Reduction Targets
Track progress against verified baselines
Cross-Site Benchmarking
Compare performance across facilities
Built for
Energy Reduction
Key advantages of Omni Vision for energy consumption management and reduction.
Full Consumption Visibility
Every energy stream metered at the granularity you need — facility, department, equipment level — so you know exactly where energy goes before trying to reduce it.
AI Waste Identification
Machine learning analyses consumption 24/7, flagging anomalies and waste patterns that periodic energy audits and manual analysis consistently miss.
Verified Baseline & M&V
Establish accurate consumption baselines and verify savings from improvement projects using measurement and verification protocols — proof that investments deliver.
Reduction Target Tracking
Set energy reduction targets and track live progress against baselines — at facility, department, or equipment level — with automatic alerts when you drift off course.
CO2 Emissions Intelligence
Scope I and II carbon emissions calculated automatically from metered data — supporting net-zero roadmaps, regulatory compliance, and sustainability reporting.
Cross-Site Benchmarking
Compare energy performance across facilities, departments, and equipment to identify underperformers and replicate best practices across your portfolio.
Energy
Omni Vision FAQ
Common questions about Omni Vision for energy consumption monitoring and reduction.
Electricity, gas, water, steam, compressed air, and oil — with instrumentation sized for your facility during the site survey. Beyond energy streams, it connects to any process signal, sensor, or PLC tag on site, so consumption can be correlated with the operational data that explains it.
The AI engine continuously analyses consumption patterns against expected baselines — flagging anomalies like equipment running outside production hours, compressed air leaks, steam trap failures, and heating/cooling overlap that indicate waste.
Yes. Omni Vision reads existing PLCs and meters via Modbus, OPC-UA, BACnet, and MQTT. The connection is strictly read-only — no interference with plant operations, no reprogramming required.
Omni Vision builds consumption baselines from metered data, accounting for production volume, weather, and operational variables. Savings from improvement projects are verified against these baselines using industry-standard M&V protocols.
Yes. Scope I and Scope II emissions are calculated automatically from metered gas and electricity consumption using current emission factors. The data is audit-ready and updates in real time.
Initial consumption patterns and waste are visible as soon as metering goes live. Typical deployments achieve 15-25% energy cost savings with payback under 12 months, based on results across 150+ customer sites.
Smarter
Energy
Deploy Omni Vision for full energy visibility, AI-driven waste identification, and measurable consumption reduction across your facility.
- Full energy metering & consumption analysis
- AI-powered waste identification
- Reduction target tracking & M&V
- CO2 Scope I + II reporting